Why Trust The FOLISTECH Drop Weight Impact Tester?
- You can evaluate pipe impact resistance according to common thermoplastic pipe testing standards.
- Automatic hammer lifting and preset height control help your team reduce manual operation.
- Anti-secondary-impact protection helps prevent repeated strikes from affecting test results.
- LCD height display makes your test setup more direct and easier to confirm.
- Adjustable hammer mass from 0.25 kg to 15 kg helps you match different pipe and plastic product requirements.
- · The compact machine height and automatic program help your laboratory complete pipe impact testing more efficiently.
Professional Drop Weight Impact Testing Solution For Plastic Pipes
When you test PVC-U pipes, PE water supply pipes, drainage pipes, corrugated pipes, or rigid plastic profiles, you need reliable impact height control, stable hammer release, and protection against secondary impact. The FOLISTECH Drop Weight Impact Tester helps your laboratory evaluate external impact resistance with PLC control, LCD height display, automatic zeroing, automatic lifting, preset height control, and a 100% capture rate for secondary-impact prevention. This helps your team reduce manual errors and keep the test process closer to the required standard workflow.
Our Main Drop Weight Impact Tester
For PVC-U, PE, drainage, communication duct, corrugated pipe, rigid plastic sheet, and profile impact testing.
PLC-controlled system with LCD height display, automatic lifting, automatic zeroing, and anti-secondary-impact capture.
Function Of The Drop Weight Impact Tester
Different pipe and rigid plastic products fail in different ways under external impact. You can use the Drop Weight Impact Tester to match your pipe diameter, material type, hammer mass, and impact height to your real QC requirements.
You can evaluate external impact resistance for water supply pipe quality control.
You can test pipe durability for buried drainage and wastewater applications.
Your team can check the impact performance for PE pipe production and inspection.
You can test corrugated pipe impact resistance under controlled drop height.
Reduce Setup Errors In Drop Weight Impact Tester
In pipe impact testing, small setup errors can affect your final judgment. If the drop height is not controlled accurately, or if the hammer strikes the specimen a second time, your result may not reflect the real impact resistance of the pipe. With PLC control, LCD height display, automatic lifting, automatic zeroing, and 100% secondary-impact capture, this tester helps your team run impact tests with a more consistent and standard-compliant process.
Why Choose FOLISTECH?
When you choose FOLISTECH, you get support for matching your test standard, pipe diameter, hammer configuration, impact height, and laboratory workflow. Your team may need to test different pipe materials or product sizes, so we help you confirm the right configuration before purchase. This reduces selection uncertainty and helps your laboratory move from installation to routine testing more smoothly.
Drop Weight Impact Tester For Pipe Testing
If you manufacture PVC-U, PE, or corrugated pipes, you need a reliable way to check whether your products can withstand external impact. This tester helps your QC team use an adjustable hammer weight and controlled impact height to evaluate pipe performance before shipment.
When your laboratory tests pipes according to GB/T 14152, GB/T 6112, or related standards, you need repeatable height control and clear operation. The automatic lifting, zeroing, and preset height functions help your team reduce repetitive manual work.
If your application includes rigid plastic sheets, profiles, or automotive plastic parts, you can use the drop weight impact method to compare impact resistance and support material selection, quality inspection, or product development.
Product Details Tab
- Applicable Standards
- Technical Specifications
- Standard Configuration
| Standard | Description |
| GB/T 14152 | Test method for resistance to external blows of thermoplastics pipes |
| GB/T 14153 | General test method for drop weight impact of rigid plastics |
| GB/T 6112 | Test method for impact resistance of thermoplastics pipes and fittings, drop weight method |
| GB/T 10002.1 | Unplasticized polyvinyl chloride (PVC-U) pipes for water supply |
| GB/T 10002.3 | Unplasticized polyvinyl chloride (PVC-U) pipes for buried sewage and wastewater |
| GB/T 13664 | Thin-wall unplasticized polyvinyl chloride (PVC-U) pipes for low-pressure water transmission irrigation |
| GB 11548 | Test method for impact resistance of rigid plastic sheets, drop weight method |
| JB/T 5125 | Agricultural rigid PVC pipes |
| GB/T 5836.1 | Unplasticized polyvinyl chloride pipes for building drainage |
| Item | Specification |
| Maximum Impact Energy | 300 J |
| Impact Height | 50 mm +/-2 mm to 2000 mm +/-2 mm |
| Impact Height Error | +/-2 mm |
| Energy Loss | <0.25% |
| Repeated Positioning Error | <+/-1 mm |
| Applicable Pipe Diameter | Dia. 20 mm to Dia. 400 mm |
| Workbench Stroke | 0 mm to 400 mm |
| Hammer Head Models | D25 mm, D90 mm |
| Hammer Body Mass | 0.25 kg to 15 kg, adjustable weight configuration fully compliant with standard hammer configuration |
| Power Supply | AC220V -15% to AC220V +10%, 50 Hz, 500 W, single-phase three-wire system |
| Overall Dimensions | 1160 mm x 600 mm x 3650 mm |
| Item | Quantity / Description |
| PLC control system | 1 set, on the main machine |
| Display screen | 1 set, on the main machine |
| Autonics photoelectric switch | 1 set, on the main machine |
| Driver and motor | 1 set, on the main machine |
| 0.25 kg to 15.00 kg weights | 1 set, configured according to national standards |
| Hammer rods | Type A and Type B, 1 set each |
| Clamping weights | 50 g, 100 g, 200 g, 250 g, 500 g, 1000 g each; 2000 g x 2; 3000 g x 3 |
| Power cord | 1 piece |
| V-block | 2 pieces, one installed on the main machine |
| Precision lead screw | 1 set, on the main machine |
| Chain transmission system | 1 set, on the main machine |
Customer Feedback On Drop Weight Impact Tester
“With automatic lifting and preset height control, our team can reduce manual setup work during routine pipe impact testing. This is especially useful when testing different pipe sizes or running repeated quality checks.”
Ahmad RahmanPipe QC Supervisor, Malaysia“The anti-secondary-impact function helps our laboratory avoid repeated strikes that may affect result reliability. It gives our team a cleaner and more controlled impact testing process.”
Omar Al-MansooriInspection Laboratory Engineer, United Arab Emirates“The automatic zeroing and LCD height display make our impact tests easier to standardize across different pipe samples.”
Samuel OkaforMaterials Testing Specialist, Nigeria
The Drop Weight Impact Tester can test PVC-U water supply pipes, drainage pipes, low-pressure water pipes, PE pipes, communication ducts, double-wall corrugated pipes, rigid plastic sheets, profiles, and selected automotive plastic parts.
The Drop Weight Impact Tester provides a maximum impact energy of 300 J for pipe and rigid plastic impact testing.
The Drop Weight Impact Tester supports an impact height range from 50 mm ±2 mm to 2000 mm ±2 mm.
The Drop Weight Impact Tester supports pipe testing from Dia. 20 mm to Dia. 400 mm.
The Drop Weight Impact Tester has an anti-secondary-impact function with 100% capture rate, helping prevent the hammer from striking the specimen again after the first impact.
Yes. The Drop Weight Impact Tester supports automatic lifting, automatic zeroing, and automatic lifting to preset height for easier test setup.
The Drop Weight Impact Tester supports a hammer body mass range from 0.25 kg to 15 kg, with an adjustable weight configuration according to standard hammer requirements.
